|
|
Digital microphone signal processing
Vykydal, Martin ; Macho, Tomáš (referee) ; Havránek, Zdeněk (advisor)
The aim of this work is to implement digital filters into programmable gate array. The work also includes a description of the MEMS technology, including comparisons with the technology of MEMS microphones from various manufacturers. Another part is devoted to the Sigma-delta modulation. The main section is the design and implementation of digital CIC and FIR filters for signal processing of digital microphone, including simulation and verification of properties of the proposed filter in Matlab.
|
|
|
Telemetry for Dragon IV Formula
Bezdíček, Jan ; Petrlík, Jiří (referee) ; Šimek, Václav (advisor)
The aim of this master's thesis was to design and construct complete telemetry system for the student formula Dragon IV constructed for international Formula Student competition. At first, the work deals with the measurement of the physical quantities, telemetry system and automotive sensors of the formula, their mutual communication and communication with the CAN bus. It also describes the procedure of hardware design including choosing right inertial sensors and a GPS module and their using in telemetry system. The work contains materials for production of two-layer printed circuit board extending the microcomputer BeagleBone Black on the inertial sensors and the GPS module. The bigger part of the telemetry system is the firmware for hardware and software for the computer user. Both written in programming language C++ and C# are included in this work as well. This user application serves for wireless receiving data from the hardware and their showing and logging. In addition this user application can be used for wireless hardware configuration. The final product is the complete telemetry system and it is suitable for selling to end customer.
|
|
|
Automatic calibration of inercial sensors
Hamada, Vladimír ; Vágner, Martin (referee) ; Macho, Tomáš (advisor)
The main aim of this thesis is to design and build automatic calibration system for inertial measurement sensors. The calibration system is intended to support the development of devices with inertial measurement sensors. The great emphasis is placed on the configurability of system and for this reason all calculations are realized by Matlab system, which is well known by engineers. There is also presented design of inertial measurement unit, which is used as a~model sensor unit for calibration system development.
|
|
|
The MEMS sensors usability for position detection
Bobalík, Lukáš ; Sedláček, Jiří (referee) ; Žák, Jaromír (advisor)
Within this Master’s thesis, design and construction of a strapdown inertial navigation system based on MEMS sensors is described. The thesis includes theoretic analysis of physics behind determining the position of an object based on the object’s aceleration and changes in the object’s orientation in space. Included is also an overview of mathematical methods related to the position calculation.
|
|
|
Measurement of MEMS gyroscope parameter changes
Raichl, Petr ; Beneš, Petr (referee) ; Kunz, Jan (advisor)
The thesis is aimed on determination of parameters of MEMS gyroscopes with Allan variance. In the introduction, there is principle of gyroscopes described. The first part describes deterministic and stochastic parameters. Methods for determining these parameters are also described. In the practical part, stochastic parameters of two gyroscopes are determined with Allan variance. In the next part, thesis describes determination of changes of stochastic parameters after vibrations and shocks.
|
|
|
MEMS based energy harvesting
Klempa, Jaroslav ; Prášek, Jan (referee) ; Gablech, Imrich (advisor)
This work is dedicated to principles of energy harvesting or scavenging from free energy around us. Energy harvesting principles are described in the first part. Following chapter is devoted to description of piezoelectricity and piezoelectric materials. Next part researches already reported results on piezoelectric energy harvesters. Following chapter shows simulations on designed structures in ANSYS® Workbench. Next the fabrication of the structures is described. Measurement are made regarding to maximum generated power.
|
|
|
Submicron Structures with Deep Relief — Technology of Preparation
Matějka, Milan ; Kuřitka,, Ivo (referee) ; Mgr. Petr Klapetek Ph.D (referee) ; Kolařík, Vladimír (advisor)
The dissertation thesis is focused on research and development in the field of microfabrication by the technology of electron beam lithography. In the first part of this work, the extensive study is conducted in the field of technology of electron beam lithography in terms of physical principles, writing strategies and resist materials. This is followed with description of physical principles of etching for the transfer of relief structures into substrates. The thesis describes innovative techniques in modelling, simulation, data preparation and optimization of manufacturing technology. It brings new possibilities to record deep binary or multilevel microstructures using electron beam lithography, plasma and reactive ion etching technology. Experience and knowledge in the large area of microlithography, plasma and anisotropic wet-etching of silicon have been capitalized to the design process of manufacturing of nano-patterned membranes. It was followed with practical verification and optimization of the microfabrication process.
|
|
|
ECG data recorder
Hruškovský, Antonín ; Krajsa, Ondřej (referee) ; Burda, Karel (advisor)
The master thesis deals with the issue of long-term ECG recording, used in medicine for monitoring of cardiac anomalies. Author focuses on explaning the general concepts in the first part. Author describes measuring methods and issues associated with measuring. Comparison of existing devices and design of solution with own features are in next chapter. Next is comparison and selecting of formats for recording measured data and description of device connectivity. In next chapter author focuses on hardware design and implementation of device. After that author describes software solution design for microcontroller, Bluetooth module and smartphone. Author introduces possible improvements for future generation of the device and then describes results of testing at the end of this work.
|
|
|
MEMS microhotplate platform for chemical sensors
Vančík, Silvester ; Svatoš, Vojtěch (referee) ; Prášek, Jan (advisor)
This master’s thesis deals with design and fabrication of MEMS microhotplate platform for chemical gas sensors. The theoretical part describes MEMS, sensors and processes and technologies needed for fabrication of micro hotplate. The practical part includes simulations, masks and step by step microhotplate fabrication. Fabricated heating membrane was characterized and compared to theoretical values from simulations and to similar devices presented in literature.
|
|
|
Cavitation in microfluidics
Holub, Martin ; Kozák, Jiří (referee) ; Rudolf, Pavel (advisor)
Mikrofluidice byla v posledních letech věnována intenzivní pozornost výzkumnými týmy takřka po celém světě. Její možné aplikace jsou velmi početné, zejména pak v oblasti zdravotnictví, ukládání energie do baterií nebo chlazení vysoce výkonných počítačů. Bakalářská práce „Kavitace v mikrofluidice“ se zabývá kavitací na mikro-měřítku. Nedávný výzkum ukazuje, že mnohé charakteristiky kavitujícího proudění na takto malých rozměrech se podstatně liší oproti charakteristikám pozorovaným na konvenčních makro-rozměrech. Toto podtrhuje relevantnost této práce. Lepší pochopení tohoto jevu může být využito například k řešení jednoho ze značných úskalí mikrofluidiky a to sice mísení tekutin, nebo dále také k jejich pumpování. Mezi další možné aplikace se řadí mechanické namáhání a rozklad mikroorganismů a buněk, katalýza chemických reakcí a cílená doprava léčiv. První část této práce je věnována postupně základům z oblasti mechaniky tekutin a chemie kavitace. Tato část je následována stručným přehledem aplikací kavitace a to jak na měřítkách tradičních, tak na měřítkách v řádech mikrometrů. Poté je uveden popis numerického řešení kavitujícího proudění spolu s analýzou a ověřením získaných výsledků. Mezi výsledky je například popis rozložení fází, informace o tom, kde dochází k recirkulaci a také přehled vlivu změny kavitačního čísla na tvar a charakteristiky proudění. V závěrečné části práce je pak na základě získaných znalostí navržen experiment, který umožní dále studovat tuto problematiku a poslouží také k vyhodnocení vhodnosti laminárního modelu. Tato bakalářská práce slouží jako základní kámen pro další výzkum v této oblasti plánovaný na Vysokém učením technickém v Brně, a z tohoto důvodu jsou v textu uvedena doporučení pro další práci.
|
guest ::
